Coupons

With the activities module, a (mandatory) choice question can be added in the registration flow. For example, a list of distances or registration options from which the fundraiser must choose, or the question of what kind of fundraiser it concerns. Content:Add activitiesSelecting and using activitiesShowing/not showing selected activity1. Add activitiesSettings ⟶ Activity listBefore you start, you will first need to add activities to the overall list of activities. Think of this as a kind of library where all activities are listed and you can choose which of them you want to use per site, sub site or campaign.2. Selecting and using activitiesAt site level, per sub site and per campaign, you can configure activities for use. This configuration consists of 2 parts: selecting activities and using activities.2.1 Selecting activitiesSettings ⟶ ActivitiesThe first part consists of choosing the activities from which the fundraiser can choose. At site level, this allows you to choose from the full list of activities. At sub site and campaign level, a thinned list may be visible, depending on the configuration below. A maximum number of participants can also be specified for each selected activity.2.2 Using activitiesSettings ⟶ ActivitiesUnder the Use activities heading, you determine how the activities are deployed. First, you determine how the activities should behave on This page. Then you determine it for Underlying levels.Example: at the site level, one can start a general fundraiser and no activity needs to be selected, then on This page"No, there is no need to select.... " is selected. If on underlying campaigns one does need to select an activity, one of the "Yes" options is selected at Underlying levels. Both Yes options determine that an activity must be chosen on these underlying campaigns and can still be chosen which set of activities is shown to the fundraiser.Here you determine whether fundraisers below the current level should choose an activity.You can choose to tick that Fundraisers can edit their activity themselves. They can then modify it under my registration. This is only possible if there is space available at the new activity. The moment the activity is modified, the old activity is released again.You then choose here what fundraisers get to see on the underlying levels (sub sites and/or campaigns).Example scenario - You include the Dam tot Damloop event in the website and people can register for this at 2 distances: the half and full marathon. You include these 2 distances as activities in the Activities list (at website level). Then manage the Dam tot Damloop, go to Settings > Activities and tick the 2 distances. You indicate that all fundraisers directly below this page must choose an activity. You indicate that fundraisers may change their activity themselves. Two weeks before the event, turn off the option that people may change their activity themselves.3. Showing/not showing selected activityThe selected activity is displayed in several places. You can choose whether this is desirable or not. These are the following places:On the team page / in the registration flowOnce a team captain has chosen an activity himself, it is displayed on the team page. It is also displayed in the sign-up flow once an fundraiser wants to join the team. At the step to choose the activity, it is displayed which activity was chosen by the team captain to make the choice easier.This option can be turned off when setting up activities, via Settings > Activities.On the fundraiser pageIndividual fundraisers also automatically show on their fundraising page which activity they have chosen. Is this not entirely applicable? Let a iRaiser staff member know and we will make this choice invisible across the entire website on the fundraising page.  

To start an fundraiser, you need to go through the sign up flow. Below is more information on how this works and you can set it up yourself.Article content:VideosSign up flow: the basicsSign up flow: additional stepsOptions at Settings > Sign up flowView sign up flowSign up optionsAdjust order of steps in sign up flowChange text left sideOther mattersSign up flow stepsBasicApplication options: How do you commit?Profile details: Who are you?Team pagePersonal sponsorship page: individualStarter donationOverview pageThank you pageSupplementaryEntry feeActivitiesEditions: retention at eventsDate of fundraiserPerformance: Mileage targetAdditional questionsWebshopDiscount codes VideosWould you rather see a video with an explanation? You can! Then click on either film below:Sign up flow: the basics00:00 - Welcome00:13 - Intro & table of content00:58 - Change text within sign up flow01:53 - Change sign up options02:14 - Moving steps within sign up flow02:28 - Change start fundraising button02:42 - Sign up flow step by step03:04 - GDPR Texts an menus03:46 - Create team page03:56 - Default contents and settings05:02 - Create fundraising page05:24 - Start donation05:57 - Overview page06:08P - ayment page06:22 - Thank you page Sign up flow: additional steps00:00 - Welcome00:41 - Registration fees02:08 - Activities03:21 - Editions & badges05:26 - Countdown date05:50 - Achievement06:09 - Additional questions06:28 - Webshop07:15 - CouponsOptions at Settings > Sign up flow Settings > Sign up flow takes you to the page to edit your sign up flow. Here you can see a number of settings.View sign up flowYou can always use this button to enter the sign up flow to see what it looks like. The preview mode is only meant to view the sign up flow, you cannot create fundraisers in this mode.Sign up flow optionsHere you can choose which way people can register. You have the following options:Individual + team + team memberIndividual onlyTeam + team memberIndividual + team + team member + companyIndividual + companyYou will only see the options based on the functionalities that are on. If you are not using the company functionality, then you will only see options 1, 2 and 3. If there are no teams either then you can only select individual here and the entire step in the sign up flow will be skipped.Adjust order of steps in sign up flowYou can change the order of the first four steps. You do this by dragging them with the mouse until they are in the desired order. The other steps all have a fixed order.Change text left sideYou can change the texts listed on the left-hand side of the sign up flow. For example, if you click change behind 'Who are you'. You can then edit the text in the next screen:If you click 'Change default value' then you can edit the text and add a description if you want. You can always go back to how it was originally by clicking 'Restore default value' again afterwards. And you change the text on the left (in the green sidebar):You can do this for all steps.Other mattersThere are a number of other things you can set on the Settings > Sign up flow page (see also screenshot below):You can change the text on the fundraiser start button (this can vary per campaign/sub site). The new text (e.g. come into fundraiser, swim along, etc.) can be a maximum of 15 characters and that includes spaces.You can customise the texts on the selection screens. These are selection screens that you see when you click 'start fundraiser' and then have to make a choice:General selection screen "What do you want to take fundraiser for?". Here you choose what you want to start the fundraiser for, whether it is, for example, a general fundraiser or an fundraiser for a campaignSub site selection screen "For which sub site do you want to take fundraiser?". Here you choose for which sub site you want to start an fundraiserSelection screen campaigns" For which campaign would you like to take fundraiser? Here you choose for which campaign you want to start an fundraiserSign up flow stepsThe sign up flow that fundraisers see is shown based on settings. Think, for example, that you will see an extra step with registration fee, if you use that. Below, under 'Basic' you will see the steps that are normally always there and under 'Additional' the extra steps/options. Each step is described briefly below. More information on specific functionality can be found in the support articles linked to this page. You may find below a functionality that is not included in your package.BasicThe following steps belong to the basics of the sign up flowSign up options: How do you commit?Here you can see the sign up flow options and choose how you want to sign up. You can set this via Settings > Sign up flow > Registration options. You will not see this step if there is only one option, such as individual.Profile details: Who are you?This is where you create an account for the platform. If you already have an account then you can log in and your already known data will be filled in automatically. The mandatory fields here are First name, Last name and e-mail address and agreeing to the general terms and conditions. We can optionally or compulsorily request the following additional fields here:Address (Street, House number, Suffix)PostcodeLocationCountryGenderPhone number (an additional opt-in will automatically be added here in accordance with telecoms legislation)Team pageIf you choose to create a team, you will be taken to the 'Your team page' page. Here you enter at least:The team name, the amount you want to raise, the title and the motivation. You can fill in the title and motivation beforehand via the standard settings. The amount raised can be set via Settings > Set target amount. If you chose individual or team member in the previous step, skip the team page step.Personal sponsorship page: individualYou then proceed to the page to create your individual fundraiser. Someone who creates a team in the sign up flow also creates a personal fundraiser. You can fill in the title and motivation beforehand via the standard settings. You can set the amount raised via Settings > Set target amounts. It is also possible to continue without creating an individual fundraiser if the sponsor page is optionally enabled.Starter donationBy default, this step is on, asking the fundraiser to make an initial donation in advance. This donation is optional, but we see that it is often done. You can adjust the amounts and possibly add a description via Settings > Set donation amounts. We can also turn off the initial donation if you wish.Overview pageHere you will see an overview of what you will order, or what you have selected. If necessary, you can choose to register another person. This way, you can create an fundraiser for several people at once and check them out.Thank you pageWhen payment has been made, you come back to the thank-you page. Here you can customise both the text on the left (which is standard) and the text and image on the right. You can use this to display an image that suits your site.SupplementaryEntry feeYou can add entry fees, if you ask for this for an event, for example. An fundraiser is required to choose an entry fee, but this could possibly be an entry fee of 0 euro.ActivitiesThe activities module allows you to add a (mandatory) choice question in the sign up flow. For example, a list of distances from which the fundraiser must choose, or the question of what kind of fundraiser it concerns.Editions: retention at eventsIf you use retention (editions) and an edition is set at the level you sign up at, you will be asked if you have participated before. Based on the answer, you can add badges, add a different target amount or send other emails based on the number of participations.Date of fundraiserThere is a site setting where it is mandatory for an fundraiser to specify an end date of the fundraiser. An fundraiser then gets the mandatory question "Until when does your fundraiser run". If a general countdown date is set at the level they are notified at then the question is not asked. All underlying fundraisers will then automatically get that date as the end date.Performance: Mileage targetIf achievements are possible at the level at which you create your fundraiser, you will be asked how many kilometres the fundraiser wants to cover. This is an optional question, and if filled in then this becomes the target distance for this fundraiser.You can also choose to leave that question away, by going to Settings > Achievements and unchecking the checkbox "Ask the participant's achievements goal in the registration flow":Additional questionsWe can add extra questions and this can be set per campaign, sub site, at the website level or across the whole site. We can ask the extra questions to fundraisers, but also specifically to team captains. With the extra questions, you can request additional information needed for your event. For example as in the example below that event participants are 18 years or older or have permission from their parent(s)/guardian(s). The answers to these extra questions are reflected in the export (of fundraisers and teams).WebshopIn the webshop, you can offer any additional items that can be bought. You set these up via Administration > Webshop. The webshop is only accessible in the sign up flow. You cannot therefore sell items via the platform outside the sign up flow.Discount codesYou can add discount codes and they only apply to the registration fee. That way, you can give early registrants a discount, for example, or let certain people register for free. If that functionality is on, you will see a place to enter a code at the overview screen.After clicking, you can enter the codeAnd if the code is correct, the discount code will be applied to the registration fee.

It may happen that people want to register, for example for an event, but do not want to create a separate Fundraising page for this purpose. In such a case, you can set the sponsor page to be optional. You set this up by going to the level where you want to set this up and then going to Settings > Fundraising page optional and choosing to make Fundraising page optional there. In the Sign up flow, the step where you create the Fundraising page will have a slider:If you create the action page, the slider will appear at the step where you create the action page.If you then click this slider you can continue without creating a Fundraising page:After completing the registration, the participant will receive the 'Welcome email after signing up participant'. If he/she has joined a team then he/she will receive the 'Welcome email after joining team'. If E-tickets are used then the participant will also receive the e-tickets. A participant will appear as 'registration' in the action overview after completing the registration:A participant can still create a sponsorship page if desired, by going to 'My Registration' and clicking on 'Create a sponsorship page'.On the platform, you can see the participants by going to the Overview of Participants. That defaults to /participants.

If you would like to learn more about the feature for creating e-tickets via the webshop, click here.If you would like to know how to submit items for purchase, continue reading this article.Would you like to offer a T-shirt, medal or other goodie to everyone who starts an action on your website? You can do so with the webshop function within the platform. This feature makes it possible to offer products and even services to anyone who creates an action on the website. The webshop is not on by default on the website, it can be turned on by a support person on the website. To do this, contact iRaiser. After this, the products must be added to the catalogue. Once the products are put in the catalogue, the action starter can see this right away and order directly in the action start flow!But what if these products only apply to a specific Sub site or Campaigns? No problem! In fact, it is possible to set up a catalogue at segment or project level. This catalogue will then only be visible to the campaigners at this level. Conversely, it is also possible to set up a catalogue on the main level, after which you disable it on a lower Sub site or Campaigns.Webshop items addAdministration ⟶ Webshop catalogClick Yes, there is a webshop catalogue to add webshop itemsClick Product addFill in a title (mandatory)Fill in an amount (mandatory)Evt: upload an image of the productEvt. add multiple variants (e.g. S, M, L, XL, XXL)Click SavePlease note: Unticking Yes, there is a Webshop catalogue disables the webshop but does not remove the products. View webshop ordersAdministration ⟶ Webshop ordersThis page shows an Overview of all Webshop ordersClick on the blue eye icon to see details of an order 

Ticketing via the webshop (“Ticketing”)Are you organising an event that requires tickets for attendees? If so, our webshop's ticketing feature could be the perfect solution. This feature allows you to create tickets automatically for your campaign, allowing you to stay organised and ready for your event.Features:This feature allows you to:Create varied ticket types based on cost.Register the data of the person who buy the tickets, also for future communications.Manage ticket availability and the maximum tickets that a supporter can purchase (this can be more than one if needed). During the event, easily track who is attending, and report the final attendance of the event in one click.Scan ticket during the event, and also add volunteers who can help with scanningTo activate this feature, let’s go through the steps to enable this:Enable e-tickets with the webshopFirst of all, check if the “E-tickets” and “Webshop” features are enabled in the left bar of your platform.Then, check if it's possible to turn off the creation of the fundraising page under Settings → Fundraising page.If this is not possible, please contact iRaiser support. We will check if the feature is included in your plan and then activate it for you.Create your ticket(s)To add a ticket item, go to Dashboard > Webshop > Catalog. From there, enable the webshop, add a new item, and select the 'ticket' option. You can then give the ticket a name and an amount. If it's a free ticket, simply enter "0."Additionally, you can indicate availability and set an order limit. This way, you maintain control over the number of available tickets. For example, you could create a ticket with 250 spots available, and allow a single buyer to order only four of them.You can, of course, create more than one type of ticket, with different availability and order limits for each.We also recommend adding an image; this makes the ticket visually recognizable in the registration flow. If a ticket is sold out, it will be grayed out. If it is the only type of ticket available, it will disappear completely from the registration flow.Remember to check where the tickets are available to supporters. If you create a ticket at the website level and make it available in a campaign, that ticket can be sold at both layers. Availability will be influenced by both: if there are 100 tickets available and one is bought at either the website or campaign layer, then there will be 99 tickets available for the next purchase, regardless of whether it happens on the website or in the campaign.Set up the “Sign up flow”The Sign up flow is the process a person goes through to register on the platform. In this case, it's for purchasing tickets. Let’s see how to create a simple registration flow for ticket purchase.Turn “Create a fundraising page off”On Community Fundraising Platform, by default, the person who registers is asked to create a fundraising page. For ticket purchases, we may not want them to create a page, so we need to go to Settings → Fundraising page, and then select “off”.Disable (or not) the “Start Donation”During the sign-up flow, you may ask people to make an additional, optional donation. If you don't want to add this step to make the ticket purchase even more straightforward, go to Settings → Start donation and uncheck that option.Customize the Sign up flowIt’s time to manage the steps of the registration process. Go to Settings → Sign up flow.If your website has different registration options (individual, team, etc.), you can turn them off for this layer where you want to sell tickets. We also suggest “show webshop” as the first step, so that the available tickets are the first thing presented, even before asking for registration data.You can then customize the text shown in every step of the flow on the left hand side: click on the second tab, “Sign up flow”, and then on “edit” corresponding to the step you want to modify.Remember that you can also customize the “Thank you page”, which is the page displayed after tickets are purchased. You can add text to reassure the buyer and build excitement for the event. For example: "Thank you for purchasing your tickets! You'll find them in your email in a few minutes. We're looking forward to seeing you at the event!"In the last tab, “Texts”, you can customize the registration button with a more event-related call to action, like “Reserve your place” or “Buy tickets”.EmailsOnce a client purchases tickets, they will receive related emails. The most important one will contain the PDF of the tickets attached, with one PDF per ticket.A single ticket will look like this:Note:The time it takes to generate them is proportional to the number of tickets. If only one ticket needs to be generated, it will take a few seconds. If 10 tickets need to be generated, the email will take a little longer to be sent.There are three emails to consider when enabling the ticketing system:“Set your password”: This is the standard email sent to any new user creating an account on the platform.In the email section of the layer where you created the tickets, you can then find the “participant” section.Here you may want to customize:Welcome email new participant: This is the email the purchaser will receive just after they have signed up for the event. Thank you mail for webshop ticket(s) order: This is the email with the various tickets attached. If the purchaser buys new tickets, they will receive another email like this one with the new tickets.Managing event attendanceOnce the event begins, you may want to manage the attendees. Each ticket has a QR code and a unique code on it.By clicking on E-tickets → E-tickets webshop → Overview, you will find the complete list of all the tickets generated. You can search for them by purchaser name or ID.You can even scan the QR code with your  camera (by clicking on the icon in the top right corner of the page), or create “scanner” users. Those are specific users that are only allowed to scan the tickets (they can not download data, they can not modify the contents…). Depending on the level you added them, they can scan tickets from that level. For example when you add a scanner to a specific campaign, they can only scan tickets from that campaign.Differences between tickets from participants and tickets from the webshopIn the Community Fundraising Platform, you might encounter another way to generate tickets: "participant tickets."Both types provide a PDF ticket with a scannable code, but there are some differences in how they can be used.Participant Tickets are primarily designed for events where individuals are asked (or encouraged) to set up a fundraising page and are mainly registering themselves. Marathons or other sporting events are good examples of this. If someone wishes to register more than one person, they will need to go through the registration process individually for each person. The ticket can be sent to the purchaser at a different time than when it was bought.Webshop Tickets, on the other hand, are intended for events where the main focus is simply allowing people to attend the event itself. The purchaser can buy multiple tickets in a single transaction, and the registration process can be significantly simplified by offering the ticket as the first step and removing steps like creating a fundraising page. Tickets are sent right after they're bought.If you are hosting a conference, a gala evening, or a concert, webshop tickets are the ideal choice for you.

You can specify per level (website/Sub site/Campaigns)whether Fundraisers may be started. By default it is on that actions may be started, but via Settings > Disable creation of fundraising pages you can turn this on or off  per level. Now Fundraisers can be started:Now it is not possible to start Fundraisers:

You can limit the number of fundraisers that can be created via Settings > Maximum fundraising pages. You can set this per level (website level, sub site level, campaign level). If you then want to create an fundraisers and move over the button, you will see how many spots are still available.The moment there are no more spots, you cannot click the button and it will be greyed out:Note: This setting does not go together with activities. This is because you can also set a limit on activities. In case you want to set activities and there is already a maximum number of fundraising pages set, you get the message "The limit on the maximum number of fundraising pages is cleared.". After that, you won't see the menu item max number of fundraising pages until the activities are turned off at that level. If you work with activities and you want to set a maximum number of fundraising pages across all your activities (otherwise you could set it per activity), it's best to keep track of this manually and block fundraisers triggering at some point.

It is possible within the platform to request additional information. For example, requesting a shirt size, explicit parental consent, agreeing to the additional participant regulations, etc. But also, for example, requesting extra information when making a Donations to apply for tax certificates or a special opt-in to be called. There are three places where we can add additional questions for you. In the sign up flow, the donation form and in a customised form. You cannot add the extra questions yourself. Should you wish to do so, please contact us and we will add them. Content of articleSorts of additional questionsInsert fieldsText fieldTextareaMore-choicesDropdownRadioCheckboxExtra textWhere can additional questions be added?Sign up flowDonation formCustomised formOn which levels can additional questions be added?Where can I see the completed answers to the additional questions?  Types of extra questionsInput fieldsWe have two types of input fields, a textarea and a textarea. The two are distinguished by the size of rows displayed. If you expect a short answer then you choose a textarea. In it you ask a question (which has a maximum of 40 characters) a the user fills in an answer: If you expect a longer answer you can work with a textarea: PlaceholderFor a text field or -area, you can specify a placeholder. This will then appear when the question is completed. This can be useful if you want to receive the information in a particular way, for example "enter the date dd-mm-yyyy here".Validation typesYou can have a specific form of an  answer specified. For example, if you ask for a specific date or a bank account number. If information is then specified that does not meet those specific validation requirements, the answer will not be accepted. These are the validation types we have:Numbers onlyOnly letters, dashes and dotsNumbers, letters, dashes and dots onlyValid e-mail addressValid phone numberValid IBAN numberValid zip codeValid date of birth (dd-mm-yyyy)Valid date (dd-mm-yyyy)Valid date in the future (dd-mm-yyyy)Valid date in the past (dd-mm-yyyy) Multiple-choice optionsWe have three options for multiple-choice options, and with all three you may also optionally choose to display only one option. These are the dropdown, radio and checkbox:DropdownAt the dropdown you ask a question after which the user has to click on the answer option to expand it. There they can then select one of the choices.  RadioFor radio, the first response option is selected by default. Users can then choose to select another option instead.CheckboxThis allows you to tick one or more answer options yourself.For all the questions above (except radio), you can indicate whether that question is mandatory or optional. Extra textTo introduce the questions, or give some extra information, we can insert titles and info text. A title has a slightly larger font than the infotext.  Where can additional questions be added?There are three places where we can add additional questions. In the sign up flow, on the donation form and in a customised form.Sign up flowThe additional questions are asked in the sign up flow after creating the sponsor page (or team page/company page) and before the webshop/startup donation/overview page (depending on which steps there are in the sign up flow):Donation formThe addition of additional questions to the donation form works the same and you will then see these below the personal data. The only difference is that no special personal data should be asked in this place. Customised formWe can create a customised form. This is in the form of a Menu item and in it you can request information (separate from the sign-up and donation flow).You enter an e-mail address and the completed forms are one on one forwarded to that e-mail address. These come in as separate emails and you cannot download an Excel file from this.Optionally, you can set another destination url where the user, after filling in the form, is automatically redirected.Below are some examples of applications of custom forms:Customised form of the Giro di Muscoli for participants in the family stageHere they ask participants to fill in the names.  Customised Night of Refugee form to order t-shirts separatelyCustomised form from the Metakids Foundation for a participant action.An action starter sells shells and these can be ordered using this form. This action starter receives the submitted emails and can match the orders to the payment reference.On which levels can additional questions be set?"Customised forms always appear as Menu items, but additional questions for the sign-up or donation flow can be set at different levels. Below you can see which ones:Everywhere on the websiteOn the homepage onlyOn the homepage of a Sub siteOn a specific CampaignIn addition, you can choose between whether the additional questions should be asked to a campaigner, a team captain or a company starter.Where do I see the completed answers to the additional questions?For the Donations form you will see these in your dashboard near the donation itself if you click on the 'eye'. In addition, you can find it in the Donations Excel file. An extra tab has been added there where the completed answers to the extra questions are listed.In the Sign up flow, you can see the extra questions in the actions/participants when you click on the 'eye'. In addition, you can find them in the Fundraisers Excel file. There too, an extra tab has been added where the completed answers to the extra questions can be found. For Teams and Companies it works in the same way (click on eyelet, and in the export of Teams and Companies respectively)In the case of a adjusted form, the completed results are emailed to the email address provided. Do you want additional questions added? Then contact us.

You can register as an individual, but you can also start a team or join an existing team. As a team, you have your own team page, where you can see more information about the team and who the team members are. Here, as team captain, you can add news items and edit the team page. Watch the video on managing teams here, or read more about specific sections below.00:00 - Welcome00:27 - Overview and download team01:23 - Adjust a team02:46 - Creating teams manually03:49 - Creating team members04:22 - Appoint a team captain 05:33 - Move teams06:01 - Other options Article contentTeam captainContentSettingsDonationsTeam membersManagement teamTeam captain changeAdding team members to a teamDelete team membersAdd a team via the dashboardStarting a team as an fundraiser after registrationCap on number of team members Team captainThe team captain is the one who created the team and thus the one who is in charge of the team. The team captain can do the following:ContentChange team name, profile picture, title and team description (Content > Motivation)Add image or video to team page (Content > Pictures and videos)Add sponsor logos (Content > Sponsor logos)Add news items (Content > Blog)SettingsAllow team members (Settings > Allow team members)Here the team captain can choose to allow unlimited members, allow a certain number of team members (note: if an activity must be chosen then this option is not there), or no longer allow team membersClose team (Settings > Close page)Set target amount team (Settings > Target amount)DonationsThe team captain can view all donations made on team members by clicking on the 'i' behind the donation.Team membersA team captain can remove activists from his or her team. This can be done on the team members overview page, by clicking on the three dots behind one of the team members and choosing 'Remove from team'. A team captain can also see more information about team members' fundraisers by clicking on the 'i' under the three dots. Management teamAs a site administrator, you can immediately see per fundraiser whether it is a member of a team or not. You can see this through the following icons:FundraiserTeam memberTeam starterChange team captainYou can change the owner of a team. You do this by going to teams and looking up the team. Then click on the three dots behind the team and choose 'assign user'. Then select the new owner of the team (if necessary, you can create a new user first).Adding team members to a teamIf someone has signed up and then finds out that he or she would have preferred to be in a team, that person cannot change that themselves, only a site administrator can do that.Adding an existing participant/fundraiser holder to a team is basically no more than moving this fundraiser to the team. First, you look up the fundraiser by going to 'Fundraisers'. Then click on the three dots and select move. You look up the team and click move. Then the fundraising page will appear under the team and that person has joined the team. Deleting team membersA team member is nothing more than an fundraising page linked to the team. If you delete a team member, the page is no longer linked to the team, but the deleted person's fundraising page remains in contact. You can delete a team member as follows: Find the team and press Manage. Then click on Team members. Then click on the three dots behind the team member you want to delete and selectDelete from team.Adding a team via the dashboardYou can also create a team via the backend. To do this, first go to where you want to create the team. For example, at site level (if your registrations are at website level), under a sub site or under a project. In case you want to add the team under a project, first find the project and manage it. Then go to teams and click on add team. A team always has a team captain, so you can link it to an existing account, or add a new account. After linking the team to an account, all you have to do is fill in the team name, team title and team description. Starting a team as an fundraiser after registrationAfter registering an fundraiser, you can also optionally start a team as an fundraiser. This can be done via the start team button:You can then create a team via the dashboard:After completing all the information (including, for example, additional questions to the team captain), the team is created. The fundraiser this team is created with then becomes team captain. No e-mails are sent after team creation.You will see the button to create the team only if:You don't have a team yetIt is possible to start a team (So via Settings > Sign-up flow > Sign-up options)It is possible to start an fundraiser. So the fundraiser start must not be blocked and there must still be free spacesOnly site administrators and the fundraiser himself can do this. The button is not visible to subsite and campaign administrators. Cap on number of team members If you have an event with a maximum number of team members, you can set this via Settings > Default team settings. All teams that are then created are allowed to have a maximum of that set number of members.You can set a maximum via Settings > Default team settings via Team members limit:If you choose "Yes, I want to specify a limit for teams under this page." there, you can set the maximum number of team members. The fundraiser who is a team captain himself also counts as an fundraiser.After activation, any limits set by the team captain are overwritten. However, if you reset them at a later time, then that previously set limit will also be reset.Existing teams that already have more members than your set maximum will remain intact. Suppose you have a team of six people, and you set a maximum across the whole project of four people per team, that team will still keep those six people. Therefore, make sure you have already set it up properly beforehand. A site administrator, sub site administrator and campaign administrator can do this.The 'allow team members' option disappears the moment you set a maximum number of team members over a certain level. So a team captain can no longer set the maximum himselfYou can set the cap at site level, sub site level and campaign level and there is no erving in it (so it is only for that level). 

The retention functionality involves asking the action starter/participant how many times he or she has participated before. Based on this, you can set a different target amount, send other emails based on the number of participations and add a badge on the campaign page. This is particularly useful for events organised annually, for example.Content of articleSet EditionsDefault target amount depending on number of participationsWelcome email - Welcome back!Badges - Make it visible to everyone Set EditionsVia Settings > Editions you can set the edition for each level (website, Sub site, Campaigns). You first set the edition:Here is no erving. If you set the 7th Edition at the website level, this will not be transferred to an underlying Campaign. So there you still have to set it manually.After setting this, an additional mandatory question will appear in the Sign up flow:Then, based on the given number of previous participations, other functions can be triggered:Default target amount depending on number of participationsDepending on the number chosen, the proposed target amount may varyëren.Example: If you join for the first time, the minimum target amount is €300. If you are participating in this event for the second time or more, the minimum target amount is €250.This can be set at the level where people can register, under Settings > Target amounts. There you can choose a target amount depending on the number of entries. This way, you can allow participants who have already raised a very high amount once to raise a lower minimum amount next time. In practice, you then often see that they still raise a nice amount, while the threshold to participate again and ask for an amount is lower. Welcome email - Welcome back!A different welcome e-mail can be sent based on the number of participants. This allows you to address the participant with a different tone if he has participated before or if he has participated in all Editions. Badges - Make it visible to everyoneIn the media (image/video) on the Fundraising page, you can display a badge for x participations. So you can overlay an image over the media, for example a crown or medal. This makes it visible to everyone on the site that someone has already participated several times! See also the support article Badges for some examples.Would you like to use the retention functionality? Just contact us, and we'll be happy to turn it on for you and then you can set the Editions for each level yourself.