Default action and team settings

The retention functionality involves asking the action starter/participant how many times he or she has participated before. Based on this, you can set a different target amount, send other emails based on the number of participations and add a badge on the campaign page. This is particularly useful for events organised annually, for example.Content of articleSet EditionsDefault target amount depending on number of participationsWelcome email - Welcome back!Badges - Make it visible to everyone Set EditionsVia Settings > Editions you can set the edition for each level (website, Sub site, Campaigns). You first set the edition:Here is no erving. If you set the 7th Edition at the website level, this will not be transferred to an underlying Campaign. So there you still have to set it manually.After setting this, an additional mandatory question will appear in the Sign up flow:Then, based on the given number of previous participations, other functions can be triggered:Default target amount depending on number of participationsDepending on the number chosen, the proposed target amount may varyëren.Example: If you join for the first time, the minimum target amount is €300. If you are participating in this event for the second time or more, the minimum target amount is €250.This can be set at the level where people can register, under Settings > Target amounts. There you can choose a target amount depending on the number of entries. This way, you can allow participants who have already raised a very high amount once to raise a lower minimum amount next time. In practice, you then often see that they still raise a nice amount, while the threshold to participate again and ask for an amount is lower. Welcome email - Welcome back!A different welcome e-mail can be sent based on the number of participants. This allows you to address the participant with a different tone if he has participated before or if he has participated in all Editions. Badges - Make it visible to everyoneIn the media (image/video) on the Fundraising page, you can display a badge for x participations. So you can overlay an image over the media, for example a crown or medal. This makes it visible to everyone on the site that someone has already participated several times! See also the support article Badges for some examples.Would you like to use the retention functionality? Just contact us, and we'll be happy to turn it on for you and then you can set the Editions for each level yourself. 

With the activities module, a (mandatory) choice question can be added in the registration flow. For example, a list of distances or registration options from which the fundraiser must choose, or the question of what kind of fundraiser it concerns. Content:Add activitiesSelecting and using activitiesShowing/not showing selected activity1. Add activitiesSettings ⟶ Activity listBefore you start, you will first need to add activities to the overall list of activities. Think of this as a kind of library where all activities are listed and you can choose which of them you want to use per site, sub site or campaign.2. Selecting and using activitiesAt site level, per sub site and per campaign, you can configure activities for use. This configuration consists of 2 parts: selecting activities and using activities.2.1 Selecting activitiesSettings ⟶ ActivitiesThe first part consists of choosing the activities from which the fundraiser can choose. At site level, this allows you to choose from the full list of activities. At sub site and campaign level, a thinned list may be visible, depending on the configuration below. A maximum number of participants can also be specified for each selected activity.2.2 Using activitiesSettings ⟶ ActivitiesUnder the Use activities heading, you determine how the activities are deployed. First, you determine how the activities should behave on This page. Then you determine it for Underlying levels.Example: at the site level, one can start a general fundraiser and no activity needs to be selected, then on This page"No, there is no need to select.... " is selected. If on underlying campaigns one does need to select an activity, one of the "Yes" options is selected at Underlying levels. Both Yes options determine that an activity must be chosen on these underlying campaigns and can still be chosen which set of activities is shown to the fundraiser.Here you determine whether fundraisers below the current level should choose an activity.You can choose to tick that Fundraisers can edit their activity themselves. They can then modify it under my registration. This is only possible if there is space available at the new activity. The moment the activity is modified, the old activity is released again.You then choose here what fundraisers get to see on the underlying levels (sub sites and/or campaigns).Example scenario - You include the Dam tot Damloop event in the website and people can register for this at 2 distances: the half and full marathon. You include these 2 distances as activities in the Activities list (at website level). Then manage the Dam tot Damloop, go to Settings > Activities and tick the 2 distances. You indicate that all fundraisers directly below this page must choose an activity. You indicate that fundraisers may change their activity themselves. Two weeks before the event, turn off the option that people may change their activity themselves.3. Showing/not showing selected activityThe selected activity is displayed in several places. You can choose whether this is desirable or not. These are the following places:On the team page / in the registration flowOnce a team captain has chosen an activity himself, it is displayed on the team page. It is also displayed in the sign-up flow once an fundraiser wants to join the team. At the step to choose the activity, it is displayed which activity was chosen by the team captain to make the choice easier.This option can be turned off when setting up activities, via Settings > Activities.On the fundraiser pageIndividual fundraisers also automatically show on their fundraising page which activity they have chosen. Is this not entirely applicable? Let a iRaiser staff member know and we will make this choice invisible across the entire website on the fundraising page.  

It may happen that people want to register, for example for an event, but do not want to create a separate Fundraising page for this purpose. In such a case, you can set the sponsor page to be optional. You set this up by going to the level where you want to set this up and then going to Settings > Fundraising page optional and choosing to make Fundraising page optional there. In the Sign up flow, the step where you create the Fundraising page will have a slider:If you create the action page, the slider will appear at the step where you create the action page.If you then click this slider you can continue without creating a Fundraising page:After completing the registration, the participant will receive the 'Welcome email after signing up participant'. If he/she has joined a team then he/she will receive the 'Welcome email after joining team'. If E-tickets are used then the participant will also receive the e-tickets. A participant will appear as 'registration' in the action overview after completing the registration:A participant can still create a sponsorship page if desired, by going to 'My Registration' and clicking on 'Create a sponsorship page'.On the platform, you can see the participants by going to the Overview of Participants. That defaults to /participants.

When registering a participant/fundraiser, it is possible to charge a registration fee, so registering for the event and creating the personal fundraising page is one integrated process. The registration fee must always be paid when creating an fundraiser, regardless of whether you sign up as a member of a team or as an individual participant. Registration fees can be added at multiple levels and 'inherit down'. When registration fees are added at the website level, any sub sites and campaigns receive this same registration fee. It is then possible to override the registration fee if there is a different value at the relevant level. It is possible to add multiple registration fee options (with different amounts).Participants can decide how they want to be registered. This can be useful, for example, for:Different distances with different starting rates;Age groups where children pay a reduced rate;In addition to the regular registration rate, offer a 2nd rate where a T-shirt of the event is offered.Content:Add registration feeChange registration feeView chosen registration feeAdd registration feeSettings ⟶ registration feeThe Add registration fee button allows you to add the option(s), asking for a title and amount. Next to this, it asks whether the paid registration fee should be included in the counter position on the website. Usually, the registration fee is meant to cover expenses and is not included (as donation money) in the counter position, but this can of course vary.Change registration feeSettings ⟶ Registration feeBy clicking the Edit button, it is possible to edit the title and amount of the option. This can be useful when offering an early bird option, where the amount is increased over time.View chosen registration fee- The campaigner himself and the site administrator can see what registration fee the campaigner has paid by managing the campaign under My Entry. In addition, the registration fee choice can be viewed in the participants' exports.- On the fundraising page, the chosen registration fee is always displayed. This is a fixed element of the page and cannot be hidden. - Registration fees are reflected in the Excel export of all fundraisers and donations.

To start an fundraiser, you need to go through the sign up flow. Below is more information on how this works and you can set it up yourself.Article content:VideosSign up flow: the basicsSign up flow: additional stepsOptions at Settings > Sign up flowView sign up flowSign up optionsAdjust order of steps in sign up flowChange text left sideOther mattersSign up flow stepsBasicApplication options: How do you commit?Profile details: Who are you?Team pagePersonal sponsorship page: individualStarter donationOverview pageThank you pageSupplementaryEntry feeActivitiesEditions: retention at eventsDate of fundraiserPerformance: Mileage targetAdditional questionsWebshopDiscount codes VideosWould you rather see a video with an explanation? You can! Then click on either film below:Sign up flow: the basics00:00 - Welcome00:13 - Intro & table of content00:58 - Change text within sign up flow01:53 - Change sign up options02:14 - Moving steps within sign up flow02:28 - Change start fundraising button02:42 - Sign up flow step by step03:04 - GDPR Texts an menus03:46 - Create team page03:56 - Default contents and settings05:02 - Create fundraising page05:24 - Start donation05:57 - Overview page06:08P - ayment page06:22 - Thank you page Sign up flow: additional steps00:00 - Welcome00:41 - Registration fees02:08 - Activities03:21 - Editions & badges05:26 - Countdown date05:50 - Achievement06:09 - Additional questions06:28 - Webshop07:15 - CouponsOptions at Settings > Sign up flow Settings > Sign up flow takes you to the page to edit your sign up flow. Here you can see a number of settings.View sign up flowYou can always use this button to enter the sign up flow to see what it looks like. The preview mode is only meant to view the sign up flow, you cannot create fundraisers in this mode.Sign up flow optionsHere you can choose which way people can register. You have the following options:Individual + team + team memberIndividual onlyTeam + team memberIndividual + team + team member + companyIndividual + companyYou will only see the options based on the functionalities that are on. If you are not using the company functionality, then you will only see options 1, 2 and 3. If there are no teams either then you can only select individual here and the entire step in the sign up flow will be skipped.Adjust order of steps in sign up flowYou can change the order of the first four steps. You do this by dragging them with the mouse until they are in the desired order. The other steps all have a fixed order.Change text left sideYou can change the texts listed on the left-hand side of the sign up flow. For example, if you click change behind 'Who are you'. You can then edit the text in the next screen:If you click 'Change default value' then you can edit the text and add a description if you want. You can always go back to how it was originally by clicking 'Restore default value' again afterwards. And you change the text on the left (in the green sidebar):You can do this for all steps.Other mattersThere are a number of other things you can set on the Settings > Sign up flow page (see also screenshot below):You can change the text on the fundraiser start button (this can vary per campaign/sub site). The new text (e.g. come into fundraiser, swim along, etc.) can be a maximum of 15 characters and that includes spaces.You can customise the texts on the selection screens. These are selection screens that you see when you click 'start fundraiser' and then have to make a choice:General selection screen "What do you want to take fundraiser for?". Here you choose what you want to start the fundraiser for, whether it is, for example, a general fundraiser or an fundraiser for a campaignSub site selection screen "For which sub site do you want to take fundraiser?". Here you choose for which sub site you want to start an fundraiserSelection screen campaigns" For which campaign would you like to take fundraiser? Here you choose for which campaign you want to start an fundraiserSign up flow stepsThe sign up flow that fundraisers see is shown based on settings. Think, for example, that you will see an extra step with registration fee, if you use that. Below, under 'Basic' you will see the steps that are normally always there and under 'Additional' the extra steps/options. Each step is described briefly below. More information on specific functionality can be found in the support articles linked to this page. You may find below a functionality that is not included in your package.BasicThe following steps belong to the basics of the sign up flowSign up options: How do you commit?Here you can see the sign up flow options and choose how you want to sign up. You can set this via Settings > Sign up flow > Registration options. You will not see this step if there is only one option, such as individual.Profile details: Who are you?This is where you create an account for the platform. If you already have an account then you can log in and your already known data will be filled in automatically. The mandatory fields here are First name, Last name and e-mail address and agreeing to the general terms and conditions. We can optionally or compulsorily request the following additional fields here:Address (Street, House number, Suffix)PostcodeLocationCountryGenderPhone number (an additional opt-in will automatically be added here in accordance with telecoms legislation)Team pageIf you choose to create a team, you will be taken to the 'Your team page' page. Here you enter at least:The team name, the amount you want to raise, the title and the motivation. You can fill in the title and motivation beforehand via the standard settings. The amount raised can be set via Settings > Set target amount. If you chose individual or team member in the previous step, skip the team page step.Personal sponsorship page: individualYou then proceed to the page to create your individual fundraiser. Someone who creates a team in the sign up flow also creates a personal fundraiser. You can fill in the title and motivation beforehand via the standard settings. You can set the amount raised via Settings > Set target amounts. It is also possible to continue without creating an individual fundraiser if the sponsor page is optionally enabled.Starter donationBy default, this step is on, asking the fundraiser to make an initial donation in advance. This donation is optional, but we see that it is often done. You can adjust the amounts and possibly add a description via Settings > Set donation amounts. We can also turn off the initial donation if you wish.Overview pageHere you will see an overview of what you will order, or what you have selected. If necessary, you can choose to register another person. This way, you can create an fundraiser for several people at once and check them out.Thank you pageWhen payment has been made, you come back to the thank-you page. Here you can customise both the text on the left (which is standard) and the text and image on the right. You can use this to display an image that suits your site.SupplementaryEntry feeYou can add entry fees, if you ask for this for an event, for example. An fundraiser is required to choose an entry fee, but this could possibly be an entry fee of 0 euro.ActivitiesThe activities module allows you to add a (mandatory) choice question in the sign up flow. For example, a list of distances from which the fundraiser must choose, or the question of what kind of fundraiser it concerns.Editions: retention at eventsIf you use retention (editions) and an edition is set at the level you sign up at, you will be asked if you have participated before. Based on the answer, you can add badges, add a different target amount or send other emails based on the number of participations.Date of fundraiserThere is a site setting where it is mandatory for an fundraiser to specify an end date of the fundraiser. An fundraiser then gets the mandatory question "Until when does your fundraiser run". If a general countdown date is set at the level they are notified at then the question is not asked. All underlying fundraisers will then automatically get that date as the end date.Performance: Mileage targetIf achievements are possible at the level at which you create your fundraiser, you will be asked how many kilometres the fundraiser wants to cover. This is an optional question, and if filled in then this becomes the target distance for this fundraiser.You can also choose to leave that question away, by going to Settings > Achievements and unchecking the checkbox "Ask the participant's achievements goal in the registration flow":Additional questionsWe can add extra questions and this can be set per campaign, sub site, at the website level or across the whole site. We can ask the extra questions to fundraisers, but also specifically to team captains. With the extra questions, you can request additional information needed for your event. For example as in the example below that event participants are 18 years or older or have permission from their parent(s)/guardian(s). The answers to these extra questions are reflected in the export (of fundraisers and teams).WebshopIn the webshop, you can offer any additional items that can be bought. You set these up via Administration > Webshop. The webshop is only accessible in the sign up flow. You cannot therefore sell items via the platform outside the sign up flow.Discount codesYou can add discount codes and they only apply to the registration fee. That way, you can give early registrants a discount, for example, or let certain people register for free. If that functionality is on, you will see a place to enter a code at the overview screen.After clicking, you can enter the codeAnd if the code is correct, the discount code will be applied to the registration fee.

You can limit the number of fundraisers that can be created via Settings > Maximum fundraising pages. You can set this per level (website level, sub site level, campaign level). If you then want to create an fundraisers and move over the button, you will see how many spots are still available.The moment there are no more spots, you cannot click the button and it will be greyed out:Note: This setting does not go together with activities. This is because you can also set a limit on activities. In case you want to set activities and there is already a maximum number of fundraising pages set, you get the message "The limit on the maximum number of fundraising pages is cleared.". After that, you won't see the menu item max number of fundraising pages until the activities are turned off at that level. If you work with activities and you want to set a maximum number of fundraising pages across all your activities (otherwise you could set it per activity), it's best to keep track of this manually and block fundraisers triggering at some point.

Participants may need to be able to upload a medical certificate for a particular event to show that they can participate. Or perhaps have to specifically sign and send another document.Upload documentsThis can be conveniently done via Documents. Via Settings > Upload documents you can indicate whether documents should be uploaded after registration. You can indicate here in the Description what should be uploaded:Mails about documentsFundraisers are then asked to upload their documents. For new registrations, the mail to fundraisers "Request documents to upload after registering participant" is sent. By default, the two mails below are also still on:You can turn it off if necessary or adjust the number of days via the copy icon.Upload documentsIn the mails there is a link to go to 'my registration'. This requires the fundraiser to log in and click on 'My registration'. A notification is displayed at the top that documents still need to beüpload:Below, the fundraiser can upload his documents:The text from the Description will appear above 'Upload file'.After uploading the file, it will look like this: Controlling documentsIf mail to site administrator 'Document(s) uploaded' is on, the site administrator will receive a message after an fundraiser has uploaded documents. In that mail is a link to go directly to the correct page.You can also go to the Overview of Fundraisers to see if that the fundraisers have already uploaded their documents:You have these icons:No document(s) uploadedNo document(s) uploaded, not checkedDocument(s) approvedIf you then manage the fundraising page and go to 'My Registration' you can check the documents. You can choose to reject them by clicking delete, or approve them by ticking the box at the bottom:If the documents are deleted, the notification will reappear for the fundraiser and he should upload them again.If you create an export of all Fundraisers you will see two columns applicable to the documents. These are the columns:Number of documentsDocuments approved

Ticketing via the webshop (“Ticketing”)Are you organising an event that requires tickets for attendees? If so, our webshop's ticketing feature could be the perfect solution. This feature allows you to create tickets automatically for your campaign, allowing you to stay organised and ready for your event.Features:This feature allows you to::Create varied ticket types based on cost.Register the data of the person who buy the tickets, also for future communications.Manage ticket availability and the maximum tickets that a supporter can purchase (this can be more than one if needed). During the event, easily track who is attending, and report the final attendance of the event in one click.Scan ticket during the event, and also add volunteers who can help with scanningTo activate this feature, let’s go through the steps to enable this:Enable e-tickets with the webshopFirst of all, check if the “E-tickets” and “Webshop” features are enabled in the left bar of your platform.Then, check if it's possible to turn off the creation of the fundraising page under Settings → Fundraising page.If this is not possible, please contact iRaiser support. We will check if the feature is included in your plan and then activate it for you.Create your ticket(s)To add a ticket item, go to Dashboard > Webshop > Catalog. From there, enable the webshop, add a new item, and select the 'ticket' option. You can then give the ticket a name and an amount. If it's a free ticket, simply enter "0."Additionally, you can indicate availability and set an order limit. This way, you maintain control over the number of available tickets. For example, you could create a ticket with 250 spots available, and allow a single buyer to order only four of them.You can, of course, create more than one type of ticket, with different availability and order limits for each.We also recommend adding an image; this makes the ticket visually recognizable in the registration flow. If a ticket is sold out, it will be grayed out. If it is the only type of ticket available, it will disappear completely from the registration flow.Remember to check where the tickets are available to supporters. If you create a ticket at the website level and make it available in a campaign, that ticket can be sold at both layers. Availability will be influenced by both: if there are 100 tickets available and one is bought at either the website or campaign layer, then there will be 99 tickets available for the next purchase, regardless of whether it happens on the website or in the campaign.Set up the “Sign up flow”The Sign up flow is the process a person goes through to register on the platform. In this case, it's for purchasing tickets. Let’s see how to create a simple registration flow for ticket purchase.Turn “Create a fundraising page off”On Community Fundraising Platform, by default, the person who registers is asked to create a fundraising page. For ticket purchases, we may not want them to create a page, so we need to go to Settings → Fundraising page, and then select “off”.Disable (or not) the “Start Donation”During the sign-up flow, you may ask people to make an additional, optional donation. If you don't want to add this step to make the ticket purchase even more straightforward, go to Settings → Start donation and uncheck that option.Customize the Sign up flowIt’s time to manage the steps of the registration process. Go to Settings → Sign up flow.If your website has different registration options (individual, team, etc.), you can turn them off for this layer where you want to sell tickets. We also suggest “show webshop” as the first step, so that the available tickets are the first thing presented, even before asking for registration data.You can then customize the text shown in every step of the flow on the left hand side: click on the second tab, “Sign up flow”, and then on “edit” corresponding to the step you want to modify.Remember that you can also customize the “Thank you page”, which is the page displayed after tickets are purchased. You can add text to reassure the buyer and build excitement for the event. For example: "Thank you for purchasing your tickets! You'll find them in your email in a few minutes. We're looking forward to seeing you at the event!"In the last tab, “Texts”, you can customize the registration button with a more event-related call to action, like “Reserve your place” or “Buy tickets”.EmailsOnce a client purchases tickets, they will receive related emails. The most important one will contain the PDF of the tickets attached, with one PDF per ticket.A single ticket will look like this:Note:The time it takes to generate them is proportional to the number of tickets. If only one ticket needs to be generated, it will take a few seconds. If 10 tickets need to be generated, the email will take a little longer to be sent.There are three emails to consider when enabling the ticketing system:“Set your password”: This is the standard email sent to any new user creating an account on the platform.In the email section of the layer where you created the tickets, you can then find the “participant” section.Here you may want to customize:Welcome email new participant: This is the email the purchaser will receive just after they have signed up for the event. Thank you mail for webshop ticket(s) order: This is the email with the various tickets attached. If the purchaser buys new tickets, they will receive another email like this one with the new tickets.Managing event attendanceOnce the event begins, you may want to manage the attendees. Each ticket has a QR code and a unique code on it.By clicking on E-tickets → E-tickets webshop → Overview, you will find the complete list of all the tickets generated. You can search for them by purchaser name or ID.You can even scan the QR code with your  camera (by clicking on the icon in the top right corner of the page), or create “scanner” users. Those are specific users that are only allowed to scan the tickets (they can not download data, they can not modify the contents…). Depending on the level you added them, they can scan tickets from that level. For example when you add a scanner to a specific campaign, they can only scan tickets from that campaign.Differences between tickets from participants and tickets from the webshopIn the Community Fundraising Platform, you might encounter another way to generate tickets: "participant tickets."Both types provide a PDF ticket with a scannable code, but there are some differences in how they can be used.Participant Tickets are primarily designed for events where individuals are asked (or encouraged) to set up a fundraising page and are mainly registering themselves. Marathons or other sporting events are good examples of this. If someone wishes to register more than one person, they will need to go through the registration process individually for each person. The ticket can be sent to the purchaser at a different time than when it was bought.Webshop Tickets, on the other hand, are intended for events where the main focus is simply allowing people to attend the event itself. The purchaser can buy multiple tickets in a single transaction, and the registration process can be significantly simplified by offering the ticket as the first step and removing steps like creating a fundraising page. Tickets are sent right after they're bought.If you are hosting a conference, a gala evening, or a concert, webshop tickets are the ideal choice for you.

You can register as an individual through the sign-up flow and then you will have a separate fundraising page. You can add news items here and edit your fundraising page.You may also register as a team member. For that, you also create an fundraiser, but then the fundraiser is linked to the team and the revenues count for the team.Watch the video on managing fundraisers here, or read more about specific sections below.00:00 - Welcome00:27 - Download overview fundraisers01:40 - Adjust a page02:33 - Adjust my subscription03:14 - Manually adding a fundraise page04:58 - Change the owner of a page06:30 - Move fundraiser07:29 - Other optionsArticle contentFeatures fundraisersManagement of fundraisersMoving fundraisersManually adding fundraisersEmails to fundraisers  Feature fundraisersAn fundraiser always has one ownerAn fundraiser is always linked to a user, which is the owner of the fundraiser. And they can also manage the fundraising page. However, a user may have several fundraisers.An fundraiser can close and reopen an fundraiser himselfThe latter can only be done if it is possible to start an fundraiser at that time.You can move or assign an fundraiser to someone else afterwardsThis can only be done by a site administrator. Management of fundraisersWhen an fundraiser logs in, he/she enters the dashboard directly to edit his/her fundraising page. If the fundraiser has multiple fundraisers, there is a drop-down menu in front of it to choose which fundraiser he/she wants to edit. As site administrator, you can edit an fundraiser by looking it up in the fundraiser overview. You then click on the pencil icon to enter the fundraiser management. There you have the following options:My pageMotivationChange fundraiser name, fundraiser title, description, fundraiser url and number of participations (only an administrator can change the number of participations)Photos and videosAdd photos and videos to be placed on the fundraising pageSponsor logosAdd sponsor logos that will appear with the fundraiser BlogHere, an fundraiser can post his or her own Blog about his or her fundraiser. People who have indicated that they want to be kept informed will receive a notification about this.AgendaHere, fundraisers can organise their own fun things and put them in the agenda. People can then also donate to itSettingsClose pageAn fundraiser (or a site administrator) can close the fundraiser here. A closed fundraiser can be reopened (provided it is currently possible to start an fundraiser at that level) by the fundraiser or site administrator. Once an fundraiser is closed, it can no longer be donated to. If an fundraiser hangs below a project and that project is closed, all underlying fundraisers are also closed at the same time.Target amountHere, an fundraiser can adjust his/her target amount. This cannot be later than the minimum target amount set at that level.Countdown dateHere you can change the countdown date for the fundraiser. You will only see this option if it is possible to set a countdown date for the fundraiser and if the level the fundraiser falls under does not have a countdown date set.PSP description (not visible to fundraisers)Here, administrators can change the PSP description of an fundraiser.Additional description (not visible to fundraisers)Here, administrators can change the additional description of an fundraiser.DonationsDonations overviewHere you can see the donations made to this fundraiser. An fundraiser will see less information if he clicks on the 'i' (example). Site administrators can also download all donations for this fundraiser hereManual donationsHere you can add a manual donation and it will be added to this fundraiser.AchievementsHere, an fundraiser can add achievements, link with Strava and set a target distance. You can read more about achievements here.My registrationHere is an overview of all data entered when registering. An fundraiser can possibly modify the activity if that functionality is enabled. Site administrators can modify the number of participations, the activity and the answers to additional questions here.Moving fundraisersSomeone may have created an fundraiser in the wrong place. You can then easily move the fundraiser back to the right place:You go to the fundraisers overview and click on the three dots and then on moveThen find the place you want to move the fundraiser to and click move.Manually adding fundraisersYou can also add fundraisers manually. You can do this by going to where you want to add the fundraiser and then going to fundraisers. Then click (top right) on add.Then select the owner. If it is already known, search for it in the search screen. Otherwise, click on Add account.You will then first create a new account, to which the fundraiser will be linkedYou then fill in the fundraiser details and the fundraiser is created.If an fundraiser is created via the dashboard, no e-mails are sent. You can still send a welcome e-mail yourself from the fundraiser overview by clicking on the three dots > Send welcome e-mail again. Also, no mail to set your password is sent to accounts created via the dashboard. You can send those manually via Accounts > Users > Send password. Or can be requested at the frontend via Forgot password. Emails to fundraisersThe following mails are linked to fundraisers:Welcome e-mail after creating fundraiserYou can set this based on the number of previous participations. You can also send this e-mail later by clicking on the three dots > Send welcome e-mail again from the fundraiser overview.Welcome e-mail after joining the teamThis is sent when you register as a team member. You can also set the mail based on the number of previous participations.Donation receivedThis is sent after a donation is made directly to the fundraiserTeam has received a donationThis is sent when donating directly to the team (i.e. not to a team member)Reminder after pledging donationThis is sent x days after pledging a donation. Committed donations are donations you can make on the mobile view by clicking 'pay later'. That functionality can be turned off. The mail can be copied and then the number of days can be adjusted.No donations receivedBy default, this mail is sent after 14 days, but that number can be adjusted. And is only sent if no donations have yet been received.Target amount of the fundraiser has been reachedThis mail is sent based on a percentage of the target amount. You can copy the mail and then set your own percentage. If you have set multiple mails to be achieved with a single donation, only the mail that meets the highest condition will go off. For example, if you have set an email at 30% and at 60% of your target amount, and a donation comes in which you raise 100% of your target amount all at once, only the email at 60% will go off.Tip e-mail after registrationThis mail is also copyable and will be sent x days after creating the fundraiser.The set countdown date will soon be reachedThis mail goes off x days before the countdown date is reached. You can copy the mail.Personalise your fundraiser with an imageThis mail is sent x days after creating the fundraiser if no fundraiser picture has been uploaded. You can copy this mail.Retrieved more than set amountThis mail is sent based on a set amount. You can copy the mail and then set your own amount. If you have set multiple mails to be achieved with a single donation, only the mail that meets the highest condition will go off.Team raised more than set amountThis mail is sent based on a set amount. When the team total reaches that, the mail goes off. You can copy the mail and then set your own number. If you have set multiple mails that are achieved with a single donation, only the mail that meets the highest condition will go off.Project is closed by project managerThis mail goes off when a project is closed. All underlying fundraisers are then informed of this (provided this mail is on). So pay attention to this before closing a project.News item addedIf you add a news item, you can choose to share it with all fundraisers directly below that level. They will then receive news of this.Performance goal of the fundraiser has been achievedThis mail is linked to the performance tracker. If this goal is achieved in its entirety, this mail goes off.

Business registration allows one to reserve and checkout spots for an event in ééone time for several colleagues.The default options for signing up for an event are:-individual-team-team memberBut what if a company wants to sign up, reserving and paying for a number of places right away? And that no other people can sign up on their company page. For this, the special Sign up flow for Companies is available! This functionality can be turned on or off by iRaiser per website. Article content:Company packagesSpecific Number of EntriesCompany determines number of registrationsAdd company package to Sign up flowSign up flow companyMail after registrationManually create a companySign up flow actionsWorkflow in combination with activity moduleDashboardCompanies and Fundraisers See the video explaining how it works here:00:00 - Welcome00:27 - Start with the company's feature01:06 - Create a company package02:45 - Setup sign up flow for the use of companies03:08 - Walking through the sign up flow for companies05:30 - Add additional team members05:57 - Manually adding a company  Company packagesThe Sign up flow for companies works on the basis of ééone or more Company packages. A company package can be a specific number of registration certificates, or it can be a number specified by the company itself. Items can be added to a package as desired, such as promotional items, t-shirts etc. For example, you can create a bronze, silver and gold package. In order to use the Sign up flow for companies, at least ééone company package has to be created. You go to the place in the platform where you want to add it (e.g. directly under the website, or at a certain Campaign) and go to Settings > Company packages. Then click on Add Company packages and you will come to this screen: You have two choices:Specific number of entriesCompany determines number of entriesSpecific number of tendersWith this choice, the content of the package is fixed. For example, a company package where you purchase 10 places. Here you enter the following:Title of the packageDescription of the contents of the packageNumber of registration placesTotal amount for the package (this amount can also be 0 euro)Company determines number of subscription spacesHere the price per spot is fixed, but the company decides how many spots they want to reserve and settle.You fill in the following per company package:Title of the packageDescription of the contents of the packageAmount to be paid per registration (this amount can also be 0 euro)Add company package to Sign up flowAfter the company package has been created, it is important to add the possibility of company registration to the sign up flow. You do this by going to Settings > Sign up flow (where you want to add this). You can then choose from these options here: Sign up flow companySign up flow looks like this:1. The 'How do you commit' drop-down screen has added the option to sign up as a company2. In the next step, choose a package. If it is a package where there is only an amount per subscription, you also need to enter the number here3. In the step after that, fill in all the company details4. Here you fill in the details of the contact person. This person will also be the manager of the company page5. Next, you create the company page. You upload a logo and fill in the title and motivation and target amount6. Additional questions (optional)You will only see this page if additional questions have been added at company level. Do you want these added? Please contact us at support@kentaa.nl. 7.On the summary page, check all the details entered and then go to the payment screen Mail-after-subscriptionAfter registration you will be sent an email: In that mail is a link that allows someone to sign up directly. One shares this link with colleagues who want to participate and then they can create an action fundraising page right away! This link can also be found in the admin dashboard.Manually create a companyYou can also add Companies manually from the dashboard. You do this by going to where you can add the company (e.g. on a particular Campaign). Then click Companies and then Add. If you don't see this option, please contact support@kentaa.nl. If so, the functionality still needs to be turned on.Next, fill in all the fields you would normally have had to fill in as well. The fields marked with an asterisk (*) are mandatory. After filling in and saving, the company is created. No emails are sent when creating the company via the dashboard.Sign up flow actions.The sign up flow for someone creating an action page with such a link looks like this:1. Start sign up flow. Here you can see what you are going to sign up for 2. We're curious to know who you are. This is where you create your profile3. Your personal page. Here you fill in your title and motivation and how much money you want to raise4. Overview page where you can check the data entered. As payment has already been made you can go straight to round up Now a colleague's Fundraising page has been created. A visitor can Donate to that Fundraising page or to the company.Working method in combination with activity moduleWhen the activity module is also used, the company's Sign up flow requests the desired activity. This activity is then applicable to all members within the team.  DashboardA new menu item called Companies has been added to the dashboard. All registered companies are listed here. If you click on the 'i' you will see the company's details. Here you will also see the link where people can register.  You can also download an Excel file from Overview. Here you can see an example of the output of this. Companies and Fundraisers.An action starter who has signed up through a link (I'll just call these 'Companies Fundraisers' below) can be seen as a regular action (i.e. not created under a company), but there are still a few differences. Here's a summary:You cannot move regular action starters to a Company. Conversely, you cannot move Company Campaigns to (for example) a Campaign. Company actions appear in the Overview of all action starters and also in the export (and api) of all action starters. You will then see some additional columns reflected in the Excel file. See here an example. Do you want to use this functionality? Then get in touch with us! If you have a customised design, the functionality needs to be built in here first.